1. Prepare Lower leg: Thoroughly clean the surface of the fork where to guard will be mounted.

​

2. Position Guard: slot the rotor guard onto the lower leg, interting the extender into the axle.

​

3. Secture Top: Fasten the top of the guard with a zip tie provied, carefully trim the excess length of the zip tie​.

​

4. Tighten bolt: Screw in the provided bolt until it comes to a natural stop, do not push past this point

​

⚠️ Caution: Do not force the bolt beyond its natural stopping point, overtightening will rip the thread out of the guard.

​

This applies for Fox, Rockshox and Ohlins mounted rotor guards.